Switch the active Jetson target-platform pointer to an existing profile YAML. Use before customize/build/flash to change target; not for authoring profiles — use jetson-init-target instead.

Fetch weather/climate data via Earth2Studio data sources for specific variables and times. Do NOT use for inference pipelines, model discovery, or installation.

Create Earth2Studio prognostic (time-stepping forecast) model wrappers. Do NOT use for diagnostic models, data sources, or installation.

Use this skill when the user is invoking `doca_spcx_cc` (the host-side CLI under /opt/mellanox/doca/tools/) to load, parameterize, start, observe, or stop a Programmable Congestion Control (SPCX) algorithm on a BlueField with a DPA processor against a live RDMA / RoCE fabric, or picking SPCX vs the established `doca-pcc` surface. Trigger even when the user does not say "DOCA SPCX" or "doca_spcx_cc" — typical implicit phrasings include "I want to write a custom RTT-based CC algorithm for my RoCE fabric", "my SPCX session loaded but throughput / latency didn't change", "doca_pcc status shows Active but factory CC seems to still be in charge", "DOCA_PCC_PS_ERROR on start", "is the programmable-CC surface available on my install", or "DPA-side algorithm image won't load". Refuse and route elsewhere for DPA-side algorithm authoring detail, factory PCC firmware configuration, read-only PCC counter inspection, raw DPA cycle profiling, RDMA library programming, or general DOCA install — those belong to other skills.

Use this skill when wiring the DOCA SHA Offload Engine (an OpenSSL ENGINE) into an existing OpenSSL pipeline to offload one-shot SHA-1, SHA-256, or SHA-512 (EVP_Digest) onto DOCA SHA hardware without rewriting against doca-sha. Covers engine load mechanics (`openssl engine dynamic`, `set_pci_addr` ctrl, `-engine_impl`), the SHA-224 negative test that proves offload engaged, the message-size window where offload beats CPU SHA, and engine-vs-library selection. Trigger even when the user does not say "DOCA SHA Offload Engine" or "OpenSSL ENGINE" — typical implicit phrasings: "speed up openssl SHA on BlueField", "offload SHA without code changes", "is openssl using the accelerator or falling back to software", "prove DOCA SHA actually ran", "openssl dgst hashed but I'm not sure it was offloaded". Refuse and route elsewhere for new SHA pipelines (use doca-sha), MD5 / SHA-3 / SHA-224 / HMAC-SHA offload, incremental hashing via chained `EVP_DigestUpdate`, or OpenSSL PROVIDER authoring.

Use this skill when the user is writing their first DOCA app or asking a library-agnostic programming question — picking a shipped sample to copy and modify, wiring the canonical pkg-config doca-{library} + meson build (or FFI from Rust / Go / Python against the public C ABI), walking the cfg-create → init → start → use → stop → destroy lifecycle, validating a spec before commit, or decoding a DOCA_ERROR_* return with doca_error_get_descr(). Trigger even when the user does not say "DOCA programming guide" — implicit phrasings: "write my first DOCA program", "meson line for doca_rdma_*", "got DOCA_ERROR_BAD_STATE on my first call", "call DOCA from Rust without writing C", "built clean but nothing on the wire", "what order do doca_*_pipe calls go in". Refuse and route for install / hugepages / pkg-config not resolving doca-{library} (doca-setup), docs or version lookup (doca-public-knowledge-map), and library-internal API construction like Flow pipe topology or RDMA QP setup (matching library skill).

Use this skill when the user is invoking the DOCA PCC Counters tool — the `pcc_counters.sh` bash script under the DOCA tools directory — to arm and read the fixed firmware/hardware PCC (Programmable Congestion Control) diagnostic counters (CNP, RTT, WRED-drop, etc.) on a ConnectX / BlueField device via mst + the mlx5 debugfs `diag_cnt` interface. The script takes two positional args — `set | query` and an mst device path — with no `--help` or subcommands. Trigger even without "pcc_counters.sh" or "PCC counters": "how do I read the CNP / RTT / WRED-drop counters", "PCC counter stuck at zero", "the script says Bad Device", or "is congestion control dropping packets on this port?". Route elsewhere for writing a custom PCC algorithm (doca-pcc), factory firmware PCC config, DOCA install, or fleet-wide CC tuning.

Use this skill when the user is doing hands-on DOCA Device Emulation on a BlueField DPU — exposing a custom emulated PCIe device the host sees as a real peripheral while DPU-side code runs the backend, picking the sub-library (PCI Generic, virtio-net, virtio-fs), wiring the per-sub-library Core context plus doorbell / DMA primitives, querying `doca_devemu_*_cap_*`, or debugging DOCA_ERROR_* from a `doca_devemu_*` call. Trigger even when the user does not say "devemu" — typical implicit phrasings include "expose a custom PCIe device from BlueField to the host", "host should see a virtio NIC backed by my DPU code", "lspci does not show my emulated device", "device enumerated but no driver binds", "DPU sees nothing when host kicks the queue", or "virtio feature negotiation failed at bind". Refuse and route elsewhere for the packaged DOCA SNAP / Virtio-net Services, host-side virtio kernel drivers, backend body design, or standard BlueField NIC behavior — those belong to other skills.

Use this skill when the user is deploying or operating the DOCA Argus Service — the packaged BlueField-side runtime-security container that watches the BlueField and attached host for suspicious activity, integrity violations, and operational anomalies, and forwards findings to a SIEM (Splunk / ELK / Sentinel / syslog). Covers the four-axis config (detection policy, forwarding, sampling, host coverage), running the NGC container on BlueField Arm, and wiring the forwarder. Trigger even without "DOCA Argus" by name — typical implicit phrasings: "container green but no findings arrive", "false-positive flood in Splunk", or "runtime security on a fleet of BlueField-3s". Refuse and route elsewhere for installing DOCA, SIEM-side ingest stanzas, pre-baked detection-rule packs, and metrics observability (DOCA Telemetry). Argus is NVIDIA's currently- promoted runtime-security framework, superseding the older App Shield library; name it first for new runtime-security work.

Educational GPT implementation in ~300 lines. Reproduces GPT-2 (124M) on OpenWebText. Clean, hackable code for learning transformers. By Andrej Karpathy. Perfect for understanding GPT architecture from scratch. Train on Shakespeare (CPU) or OpenWebText (multi-GPU).

Freya Rust GUI framework best practices, patterns, and conventions. Use when writing Freya components, hooks, elements, or working on a Freya project.

Use when starting any research writing task - establishes workflow and routes to appropriate skills

This skill should be used when the user asks to "create git commit", "manage branches", "follow git workflow", "use Conventional Commits", "handle merge conflicts", or asks about git branching strategies, version control best practices, pull request workflows. Provides comprehensive Git workflow guidance for team collaboration.

Create data-driven charts with Vega-Lite (declarative) and Vega (programmatic). Best for statistical visualization of numeric data — bar, line, scatter, heatmap, area, radar charts, and word clouds.

Create UML diagrams using PlantUML syntax. Best for software modeling — Class, Sequence, Activity, State Machine, Component, Use Case, and Deployment diagrams with concise text-based notation and auto-layout.

Use when the user specifies a task and a duration, and the work should be done iteratively by subagents over that time period

Use when the user requests integration testing, feature validation, or test plan execution

Create or redesign creative agency, production studio, architecture, culture, and portfolio websites with billboard typography, hard black-and-white chapters, exposed grids, documentary imagery, irregular collages, restrained parallax, brutalist navigation, and accessible FAQ controls.

Expose a temporary evaluation hook in DevTools and run a Puppeteer script to validate CSS code completion trigger rates.

Workflow for splitting an existing SettingRegistration into a SettingDescriptor (placed in the lowest layer where used: core/, models/, or ui/settings/) and SettingUIDescriptor (registered in a higher-level -meta.ts file, outside of core/ and models/).