Circular Import Analysis Skill

This skill runs the circular import detector locally and proposes sound architectural fixes for any cycles found. The guiding principle is Separation of Concerns: fixes must restructure ownership of code, not paper over the problem with deferred imports.

When to Use This Skill

• The detect_circular_imports CI job reports new cycles on your PR.
• You are adding a new module or moving code between modules and want to check for cycles upfront.
• You are refactoring and want to verify you haven't introduced cycles.

Running the Analysis

uv run --script scripts/import-analysis/cycles.py analyze cycles.json

This writes all detected cycles to cycles.json and prints a count to stdout. Requires uv on PATH (brew install uv or pip install uv).

To read the results:

cat cycles.json   # raw JSON array of cycles

Each entry has the full set of modules in the tangled component (nodes) and one concrete simple cycle through it (cycle), e.g.:

{"nodes": ["ddtrace", "ddtrace.internal.datastreams"], "cycle": ["ddtrace", "ddtrace.internal.datastreams", "ddtrace"]}

Clean up afterwards:

rm cycles.json

Architectural Patterns for Breaking Cycles

Never use deferred imports (import x inside a function body) as a fix. They hide the structural problem, complicate testing and static analysis, and impose a runtime cost on every call.

Understand the cycle first

Before proposing a fix, trace why each module needs the other:

# Who imports whom?
grep -rn "^import ddtrace\|^from ddtrace" ddtrace/internal/datastreams/ --include="*.py"
grep -rn "^import ddtrace.internal.datastreams\|^from ddtrace.internal.datastreams" ddtrace/ --include="*.py"

Identify the exact names (classes, functions, constants) that cross the boundary in each direction. Often only a small fraction of each module is actually involved.

Pattern 1 — Extract shared types / interfaces into a third module

When to use: Two modules share a type (e.g. a dataclass, a Protocol, a constant) that both need to import, but neither should own.

Before:

ddtrace.foo  →  ddtrace.bar  →  ddtrace.foo   (cycle)

After:

ddtrace.foo  →  ddtrace._types    (no cycle)
ddtrace.bar  →  ddtrace._types

Create a thin _types.py (or interfaces.py) module that contains only the shared contract. Both sides import from it; neither imports from the other. In dd-trace-py, ddtrace/_trace/types.py and ddtrace/internal/schema.py are examples of this pattern.

Pattern 2 — Dependency inversion (depend on an abstraction, not the concrete module)

When to use: Module A calls into module B, but B also needs to notify A of events.

Before:

ddtrace.core  →  ddtrace.contrib.foo  →  ddtrace.core

After:

ddtrace.core    →  ddtrace._interfaces.IFooHook  (abstract)
ddtrace.contrib.foo  →  ddtrace._interfaces.IFooHook  (implements)

Define a Protocol or abstract base in a third module. ddtrace.core depends on the protocol, not the implementation. The contrib module registers itself at startup (see the existing ddtrace/internal/hooks.py registration pattern).

Pattern 3 — Push initialisation to the importer (registry / lazy registration)

When to use: A lower-level module (e.g. ddtrace.internal.X) imports a higher-level module only to register or configure itself at import time.

Before:

ddtrace  →  ddtrace.internal.X  →  ddtrace   (X registers itself during import)

After: Remove the registration from ddtrace.internal.X's module scope. Instead, have ddtrace/__init__.py (the higher-level module) call X.register() explicitly after importing X. The lower-level module exposes a registration API but does not call it itself.

This is the standard dd-trace-py pattern: integrations do not self-activate; ddtrace drives the lifecycle.

Pattern 4 — Split a module along its dependency boundary

When to use: A large module contains both high-level logic (which imports from elsewhere) and low-level primitives (which are imported by elsewhere). The primitives do not actually need the high-level logic.

Before:

ddtrace.trace  →  ddtrace._trace.tracer  →  ddtrace.trace

After:

ddtrace.trace._api   (pure public types / constants — no upward imports)
ddtrace._trace.tracer  →  ddtrace.trace._api
ddtrace.trace          →  ddtrace.trace._api
                       →  ddtrace._trace.tracer

Check whether the parts of the module that are imported by the lower-level module can be split into a _api.py, _types.py, or _base.py sub-module with no reverse dependencies.

Pattern 5 — Move the code to the module that owns it

When to use: The cycle exists because a piece of logic ended up in the wrong module. This is the simplest and often best fix.

Ask: "Does this function/class conceptually belong in module A or module B?" If it belongs in A, move it there so that B (which uses it) imports from A — not the other way round. The cycle disappears because there is now a clear dependency direction.

Worked example: the current ddtrace cycles

ddtrace -> ddtrace.internal.datastreams -> ddtrace
ddtrace.trace -> ddtrace._trace.tracer -> ddtrace.internal.datastreams -> ddtrace.trace
ddtrace -> ddtrace.trace -> ddtrace._trace.tracer -> ddtrace.internal.datastreams -> ddtrace

All three cycles pass through ddtrace.internal.datastreams importing something from the top-level ddtrace or ddtrace.trace packages. The correct investigation path:

1. Find exactly what ddtrace.internal.datastreams imports from ddtrace / ddtrace.trace:

   grep -rn "^from ddtrace\b\|^import ddtrace\b" ddtrace/internal/datastreams/ --include="*.py"

2. Determine whether those names are low-level enough to live in ddtrace/internal/ (→ Pattern 5), or whether they represent a shared contract (→ Pattern 1 or 2).
3. Propose the move or extraction; do not add if TYPE_CHECKING guards or function-level imports as a substitute.

Decision checklist before proposing a fix

1. Identify the exact cross-boundary names — grep both directions.
2. Classify the dependency:
   • Shared data type / constant → Pattern 1 (extract)
   • Callback / notification → Pattern 2 (inversion)
   • Self-registration at import time → Pattern 3 (push to caller)
   • Mixed concerns in one file → Pattern 4 (split)
   • Wrong home → Pattern 5 (move)
3. Prefer the fix with the fewest new files — one move is better than a new _types.py if the type already conceptually belongs somewhere.
4. Verify by re-running uv run --script scripts/import-analysis/cycles.py analyze cycles.json after the change and confirming the cycle is gone.