CtrlK
BlogDocsLog inGet started
Tessl Logo
SkillPublic

gestures

Build drag, swipe, and sheet interactions that track the finger 1:1 and stay interruptible. Use when building or fixing anything the user drags, swipes, flings, holds, or dismisses with a gesture — drawers, sheets, swipe-to-dismiss toasts and cards, drag-to-reorder, pull-to-refresh, hold-to-confirm — or when a gesture feels laggy, disconnected from the finger, jumps on release, or can't be caught mid-animation. Triggers on — gesture, drag, draggable, swipe, swipe to dismiss, fling, momentum, velocity, drawer, sheet, bottom sheet, snap points, Vaul, dragConstraints, dragElastic, dragMomentum, onDragEnd, whileDrag, useMotionValue, rubber-band, overscroll, pull to refresh, hold to delete, press and hold, touch-action, dismiss threshold, "doesn't follow my finger", "jumps when I let go", "can't grab it mid-animation".

Quality

90%

Does it follow best practices?

Run evals on this skill

Adds up to 20 points to the overall score

View guide
SecuritybySnyk

Passed

No findings from the security scan

The canonical home for this skill is gestures in emilkowalski/skills

SKILL.md
Quality
Evals
Security

Gesture-Driven UI

How to build gestures that feel physical. A gesture is direct manipulation: while the finger is down, the UI is the finger; the moment it lifts, physics takes over. Every rule below follows from that split.

First decision: build it, or use a solution that exists?

Doing a drawer gesture right means momentum-based dragging, overlay opacity matched to drag progress, velocity-aware dismissal, focus trapping, and Escape-to-close. That is weeks of edge cases, not an afternoon. For a bottom sheet / drawer, default to Vaul — it exists precisely because this is hard to hand-roll. Build the gesture yourself only when no library covers the interaction (custom swipe cards, bespoke drag interactions). Use the pick-ui-library skill when unsure.

The two phases of every gesture

Walk this split for any gesture you build. Mixing the phases up is the #1 cause of gestures that feel wrong.

Is the pointer currently down?
├── Yes → TRACK phase: position maps 1:1 to the pointer.
│         No easing. No duration. No spring. The element IS the finger.
└── No  → RELEASE phase: physics finishes the motion.
          A spring seeded with the release velocity. Never a keyframe.

Track phase rules

  • 1:1 means 1:1. Drive position from a useMotionValue (or direct transform writes), never a spring or a transition — a spring during tracking makes the element trail the finger and feel disconnected, like dragging something through syrup.
  • Write transform directly on the dragged element. Never update a CSS variable on a parent to move children: CSS variables are inheritable, so every change recalculates styles for all descendants. This exact bug made Vaul's drag laggy past ~20 list items; setting transform on the element fixed it.
  • No React state per move event. A re-render every pointermove drops frames. Motion values and direct style writes bypass the render cycle.
  • Rubber-band at the edges. Dragging past a boundary should move the element a fraction of the distance (Motion: dragElastic ≈ 0.2), not stop dead — hard stops feel like hitting a wall; resistance communicates "there's nothing further" physically.

Release phase rules

  • Finish with a spring, seeded with the gesture's velocity. The element should leave the finger at the speed it was moving. A fixed-duration ease here makes every fling land identically, which reads as fake.
  • Dismiss on distance OR velocity. Passing a distance threshold (~40–50% of travel) dismisses, but so does a fast flick over a short distance. In Motion, read both from onDragEnd's info.offset and info.velocity. Distance-only thresholds make flicks feel ignored.
  • Bounce belongs only at the end of a drag. A drag applies force — like throwing a ball at a wall — so a slight bounce on release feels physical. The same element closed by a button press gets zero bounce: no force was applied. Keep the value small, and remember bounce scales inversely with element size (smaller elements need more bounce to read the same).
  • Snap-back is fast. If the gesture doesn't pass the threshold, return quickly with the spring — a slow snap-back feels like the UI is disagreeing with the user in slow motion.

Interruptibility is non-negotiable

The user must be able to catch a sheet mid-close and drag it back. Springs allow this: when retargeted mid-flight they keep their current velocity, so the redirect is seamless. CSS @keyframes restart from zero and cannot be caught — this is why Sonner's early CSS enter animation made toasts jump when a second toast arrived. Never use a keyframe animation on anything a gesture can touch. CSS transitions and springs only.

Linked values

The dragged element is rarely alone — an overlay fades, the page behind scales. Derive these from drag progress, don't animate them separately:

const y = useMotionValue(0);
const overlayOpacity = useTransform(y, [0, drawerHeight], [1, 0]);

One source of truth means the overlay is always exactly as faded as the drawer is dismissed — including mid-gesture, including when the user reverses. Two separate animations drift apart the moment a gesture is interrupted.

Motion drag props

<motion.div
  drag="y"
  dragConstraints={{ top: 0 }}
  dragElastic={0.2}
  onDragEnd={(e, info) => {
    if (info.offset.y > threshold || info.velocity.y > 500) dismiss();
  }}
/>

dragMomentum is on by default — right for a flung card, wrong for a simple reposition; disable it when the element should stop where the finger stops. dragConstraints takes a ref or bounds object.

Sheets without springs: the Vaul curve

Vaul mimics the iOS sheet with pure CSS to stay small: cubic-bezier(0.32, 0.72, 0, 1) over 500ms. The curve is extremely steep at the start — that's what lets a 500ms duration still feel snappy while landing with a spring-like gentle settle. Two rules from it:

  • A small floating drawer (not touching the screen edge) should override to ~200ms — the 500ms iOS timing only reads right on a full-width edge-attached sheet:
    [vaul-drawer]  { transition: transform 0.2s cubic-bezier(0.165, 0.84, 0.44, 1); }
    [vaul-overlay] { transition: opacity  0.2s cubic-bezier(0.165, 0.84, 0.44, 1); }
  • The component must feel like a single entity. If the drawer opens in 200ms, its height changes and content crossfades must live in the same timing family — one slow sub-animation makes the whole thing feel broken.

Mark interactive children with data-vaul-no-drag so pressing a button inside the drawer doesn't start a drag.

Spatial consistency

An element dismisses in the direction it entered. Sonner's toast slides up from the bottom, so swipe-down dismisses it — enter and exit share one axis, which is what makes the gesture feel discoverable and intuitive without instruction. A gesture that dismisses along an axis the element never moved on has to be learned; one that reverses the entrance is felt.

Hold gestures are asymmetric

Hold-to-delete and similar press-and-hold interactions use linear during the hold — the animation visualizes time passing, and time passes linearly; any other curve lies about how long is left. On release before completion, snap back fast with ease-out. The deliberate phase is slow and honest; the cancel is instant. Symmetric timing here is a bug.

Touch checklist

Run through this for every gesture you ship:

  • Test on a real phone — hit the dev server by local IP. Trackpad simulation lies about touch, and a 60Hz desktop monitor hides opacity-transition roughness that a 120Hz phone shows.
  • Hit targets ≥ 44×44px. Enlarge small visual targets with an invisible ::before hitbox instead of growing the layout.
  • touch-action on the drag axis (touch-action: pan-x for a vertical drag, etc.) so the browser doesn't fight the gesture with native scrolling.
  • Gate hover effects behind @media (hover: hover) and (pointer: fine) — touch fires phantom hovers on tap.

Reduced motion

Tracking is direct manipulation — the user is producing the motion — so it stays. What reduces: momentum flings, bounce, and any decorative motion around the gesture. On release under prefers-reduced-motion, settle with a short opacity/position change instead of a bouncy spring.

When it still feels wrong

A "weird" spring is usually fixed by increasing damping. A gesture that stutters is a performance problem — check the track-phase rules above first, then use the animation-performance skill. To diagnose a feeling you can't name, record the gesture and scrub it frame by frame.

Repository

englishstreetventures/osn

Path

.agents/skills/gestures/SKILL.md

Last updated
First committed

Canonical home

emilkowalski/skills
In sync

since Nov 11, 2026

Is this your skill?

If you maintain this skill, you can claim it as your own. Once claimed, you can manage eval scenarios, bundle related skills, attach documentation or rules, and ensure cross-agent compatibility.