Reverse Engineering

MANDATORY Pre-Phase 0: Branch check (multi-item exception)

RE bootstraps the entire backlog in one run, so it is the exception to the per-item branching rule. All RE artefacts land on feature/reverse-engineer-<repo-name>. Per-item branches kick in AFTER RE merges.

Branch check at start:

• On main / master / dev: refuse; AskUserQuestion to create the RE branch and switch.
• On expected branch: silent continue.
• On another branch: AskUserQuestion -- switch or rename.

RE does not create per-item GitHub issues or per-item phase tags during Phase 0-7. After RE, /dia-guide runs the one-shot pass that creates issues and tags <item-id>/reverse-engineered.

State in .git/dia-active-skill. Full rules: skills/project-conventions/references/team-workflow.md and branch-protection.md.

MANDATORY Phase 0: Artifact triage

Reverse engineering scans existing code to produce artifacts. Every artifact this skill creates lands in one of these categories:

• FEATURE (observed capability with user-facing surface)
• ADR (decision inferred from code patterns or external docs)
• IMP (technical debt or improvement candidate surfaced by the scan)
• FIX (bug or drift surfaced by the scan)

The skill assigns each artifact to its category before writing. Frontmatter feature: and epic: are mandatory for FIX and IMP.

MANDATORY: Backlog as single source of truth

Every artifact this skill creates also lands as a backlog row in _devprocess/context/BACKLOG.md. Status, phase, last-change, and claim live in the row, NOT in the artifact frontmatter.

Defaults for reverse-engineered artifacts. The BACKLOG Status column uses the GitHub-aligned vocabulary (Backlog | Ready | In Progress | In Review | Done). The ADR frontmatter and the BA frontmatter carry their own status fields.

Reverse-engineered features marked Done go straight to phase Released so the post-RE BA validation walk picks them up correctly.

Sync chain (binding order):

1. Create the backlog row
2. Create the artifact body
3. Run /consistency-check mode A at the end of the skill phase

MANDATORY: Wayfinder + rules layer as primary outputs

Wayfinder (templates under skills/architecture/templates/):

• src/ARCHITECTURE.map: one row per entry-point file.
• JSDoc headers in every entry-point file.
• Module READMEs for every src/ directory with more than 3 source files or any cross-module API.

Rules layer at _devprocess/rules/ (hard cap 500 lines total):

• technical.md: stack (from manifests), build commands, test setup, conventions visible in 10+ files.
• design.md (if UI surface exists): tokens, component patterns.
• domain.md: glossary from class/module names, invariants in code.

You ingest an existing codebase and produce the V-Model artifacts that should have existed from day one, so the team gets a stable, shared project context. You walk the V backwards, from Coding up through Architecture, Requirements, and Business Analysis, and fill each level only with what can be proven from the code or from existing documentation.

The result is not a product. It is a foundation: a set of artifacts every team member can trust, ready to be validated and carried forward through the normal V-Model phases.

Writing style. See skills/project-conventions/SKILL.md#canonical-specs (Writing style). Applies to every artifact this skill produces.

Three-layer model and frontmatter spec. See skills/project-conventions/SKILL.md#canonical-specs (Three-layer model boundaries, Frontmatter spec). Status, phase, last-change, and claim live in the backlog row, not in artifact frontmatter.

MANDATORY: FIX/IMP and depends-on

Work outside a Feature is either FIX-{ee}-{ff}-{nn} (bug) at _devprocess/requirements/fixes/ or IMP-{ee}-{ff}-{nn} (other) at _devprocess/requirements/improvements/. Both require frontmatter feature: and epic:. Frontmatter spec: see canonical specs link above.

Any artifact MAY carry depends-on: [ID, ID, ...] in frontmatter. The resulting graph is acyclic; targets must be existing IDs.

MANDATORY: Hypothesis statements as full prose

Epic hypothesis statements and How-Might-We headings are full prose paragraphs in the user's working language, not leftover template placeholders (FOR, WHO, THE, IS A, THAT, UNLIKE, OUR SOLUTION). The persona / problem / solution / differentiation structure stays in the substance.

Core philosophy

Backward walk, evidence only. Code tells you what exists. It does not tell you whether it solves the right problem. You do not invent personas, HMW questions, or value propositions from endpoint names or directory layouts. If a claim is not backed by a concrete source (path:line for code, doc:section for documentation), it becomes a [NEEDS USER INPUT] placeholder instead of a guess.

Draft, not ground truth. Everything this skill produces is marked as draft / observed / inferred / snapshot. The next skill (/business-analysis) validates each claim with the user and promotes the status to Validated or Accepted one section at a time.

Forward again from the validated state. After reverse engineering, the user goes through /business-analysis → /requirements-engineering → /architecture (if refactoring) → /coding. The reverse-engineered artifacts become the Phase 0 state for that forward walk.

What you create

• _devprocess/requirements/handoff/plan-context.md. Tech stack and codebase snapshot, ready for /coding.
• _devprocess/architecture/ADR-{XXX}-{slug}.md. One per observable architecture decision, Status: Inferred from codebase.
• _devprocess/architecture/arc42.md. Structural snapshot, Status: Reverse-engineered snapshot.
• _devprocess/requirements/epics/EPIC-{nn}-{slug}.md. One or more anticipated Epics grouping observed capabilities by theme (Status: Anticipated (not yet validated)). /business-analysis and /requirements-engineering later refine, split, merge, or rename.
• _devprocess/requirements/features/FEAT-{ee}-{ff}-{slug}.md. One per observable user-facing capability (Status: Observed (not validated)), nested under its Epic.
• _devprocess/analysis/BA-{PROJECT}.md. Project-BA draft only (singleton). Item-BAs are created by /business-analysis.
• Append entries to _devprocess/context/BACKLOG.md (TODOs, FIXMEs, gaps, tech debt, undocumented dependencies).

What you do NOT create

• Code changes, refactorings, or new tests
• Validated Epics (Hypothesis, Outcomes, HMW). RE writes only Anticipated Epics; strategic content comes from /business-analysis and /requirements-engineering.
• Success Criteria or User Stories beyond the observable ones (/requirements-engineering fills the rest after BA validation).
• Personas, HMW questions, or value props that are not explicit in existing documentation.

Anti-hallucination rules

These rules are non-negotiable. Every artifact this skill writes must comply with them, and the Quality Gates at the end check that they were followed.

1. Source per claim block. Every claim block (paragraph or table row) carries a Source: line. Trivial restatements of an already-cited fact do not need their own Source line. The BA draft (Phase 4) is the exception: every non-placeholder sentence there still carries Source:. Format:

• For code: Source: src/api/auth/handlers.ts:42-58
• For docs: Source: README.md § "Getting Started"
• For config: Source: package.json "dependencies.prisma"

2. No source → placeholder, not a guess. If you cannot find a concrete source for a section, you write:

[NEEDS USER INPUT. No evidence found in {searched sources}.
/business-analysis will fill this in.]

You do not write a "reasonable assumption" in its place.

3. No persona from code structure. You never infer personas from route names, directory names, or endpoint signatures. Endpoints are technical facts, not user research. Personas come only from explicit statements in documentation (README, marketing copy, docs/, CHANGELOG). If docs mention no user types, the persona section is a placeholder.

4. No HMW question without an explicit problem statement. If the existing documentation nowhere states the problem the product solves, the HMW section is a placeholder.

5. Provenance marker on every file. Each file carries a source: /reverse-engineering on {date} marker in its frontmatter (BA/ADR additionally keep their own status field; the BACKLOG row owns lifecycle status per the three-layer model).

6. One decision per ADR (with tight-coupling exception). Default to one decision per ADR. Tightly coupled choices that share the same Context and Consequences MAY be combined into one ADR; keep them split when Context or Consequences diverge.

Workflow

You walk backwards through the V, one phase at a time. Each phase produces one or more artifacts before you move up to the next.

Phase -1: Pre-check for existing workflow artifacts (binding)

Probe the project for existing workflow residues before any scan. Greenfield projects skip this phase.

Signals to check:

• ADR or plan dirs under docs/ or _devprocess/
• README, CONTRIBUTING, CLAUDE.md references to DIA / MADR / arc42
• Multiple ADR formats or numbering series in the same directory
• DIA v1 patterns: FEATURE-NNNN (4-digit), EPIC-NNN/ADR-NNN (3-digit), status:/phase: in YAML, > **Status**: ... lines, _devprocess/context/fixes/, _devprocess/context/20_bugs.md, numeric-prefixed 10_backlog.md, any archive/ folder

If any signal hits, stop and ask the user via AskUserQuestion:

"Existing workflow artifacts under {paths}. Proceed how? (a) normalize to current DIA conventions first (Phase -1.5 runs the migration scripts), then reverse-engineer gaps; (b) keep untouched, produce new artifacts alongside (flagged as separate source); (c) replace with reverse-engineered versions (destructive)."

Recommend (a) for DIA v1 patterns, (b) for non-DIA workflows worth preserving, (c) only when the user confirms existing artefacts are obsolete.

Phase -1.5: Migration of pre-existing artefacts

Runs only if Phase -1 chose option (a). Shares the canonical migration mechanics with /dia-migration (which confirms phase by phase; RE runs them as one consolidated pass).

Sequence (each script idempotent):

1. tools/migration/detect_state.py -- inventory v1/v2/mixed signals.
2. strip_frontmatter_status.py -- pull status: / phase: / last_updated: out of YAML.
3. strip_body_status.py -- pull > **Status**: ... lines.
4. migrate_naming.py -- rename ID schemas, rewrite cross-refs.
5. flatten_analysis.py -- collapse analysis/ to the four canonical prefixes (BA, EXPLORE, RESEARCH, AUDIT).
6. build_backlog.py -- regenerate BACKLOG.md.
7. migrate_skill_names.py -- rewrite legacy skill names in CLAUDE.md / README / inline scripts.

Numbering collisions. If two ADR series coexist, the series with the higher count of external references in code/commits/backlog wins; renumber the smaller series with a note in the renumbered ADR header.

Dedup. Two files describing the same topic: merge under the newer structure and add a "Previous variants" note. No silent deletes.

Phase 0: Scope and codebase scan (5-10 min)

Ask the user which scope applies, same tiers as /business-analysis:

What is the scope of this reverse-engineering run?

A) Simple Test / single-feature onboarding
 -> Scan the affected module, produce minimal artifacts
 -> Timeframe: 30-60 min

B) Proof of Concept / small repo
 -> Full tech-stack extraction, 3-8 ADRs, 5-15 features, BA draft
 -> Timeframe: 1-3 h

C) Minimum Viable Product / full project onboarding
 -> Full arc42 snapshot, 8+ ADRs, 15+ features, full BA draft,
 complete backlog seed
 -> Timeframe: 3-8 h

Then scan the codebase structure and list:

• Package / build manifests (package.json, pyproject.toml, Cargo.toml, go.mod, pom.xml, Gemfile)
• Top-level directories and their apparent purpose
• Entry points (main.*, app.*, index.*, src/index.*)
• Test directories and test runner config
• CI config (.github/workflows/*, .gitlab-ci.yml, etc.)
• Lint/format config, tsconfig/pyproject, etc.
• Existing documentation (README.md, docs/, CHANGELOG.md, CONTRIBUTING.md, ARCHITECTURE.md)

Report this as a Codebase Map before proceeding. This is the inventory you will draw sources from for the rest of the walk.

Phase 1: Tech stack → plan-context.md

Extract the concrete tech stack from the manifests and entry points. One Sources: line per Tech Stack block is sufficient (not per row):

## Tech Stack

- **Runtime:** Node.js >=20
- **Language:** TypeScript 5.4
- **Framework:** Next.js 14 App Router
- **Database:** PostgreSQL via Prisma
- **Auth:** NextAuth 5.x
- **Testing:** Vitest + Playwright

Sources: package.json, tsconfig.json, prisma/schema.prisma, vitest.config.ts, e2e/

Write the result into _devprocess/requirements/handoff/plan-context.md using the same structure the /architecture skill produces, with the header:

---
status: Snapshot from existing code
source: /reverse-engineering on {date}
---

The Codebase Layout, Conventions, and Existing Patterns sections of plan-context.md are filled from the scan in Phase 0.

Phase 2: Architecture reverse engineering → ADRs + arc42

Walk through the codebase and identify decisions that are visible and consequential. For each, write one ADR in MADR format with:

• Status: Inferred from codebase in the frontmatter
• Context: what you see in the code that implies this decision was made (with source)
• Decision: the observable choice
• Alternatives considered: leave as [NEEDS USER INPUT, not visible in code] unless the alternatives are mentioned in a comment or doc
• Consequences: only the ones you can see (e.g. lock-in, operational implications that are visible in CI config)
• Source: footer with all files/lines that support the decision

When to write an ADR. Only when the decision is consequential AND non-obvious from framework defaults. Skip the rest.

Write ADRs to _devprocess/architecture/ADR-{XXX}-{slug}.md, numbered in the order you discovered them.

Then produce _devprocess/architecture/arc42.md as a snapshot. Fill only the sections you can back with sources:

• §1 Introduction and Goals: copy from README/docs if present, otherwise placeholder
• §2 Architecture Constraints: from package.json engines, CI targets, license file
• §3 System Scope and Context: from entry points + external integrations you can see in config
• §4 Solution Strategy: reference the inferred ADRs
• §5 Building Block View: from top-level directories + module boundaries you can observe
• §6 Runtime View: placeholder unless explicit docs exist
• §7 Deployment View: from CI config and Dockerfile/k8s manifests if present
• §8 Crosscutting: from config (auth, logging, error handling)
• §9-12: placeholders unless evidence exists

Header of arc42:

---
status: Reverse-engineered snapshot
source: /reverse-engineering on {date}
---

Phase 3: Functional reverse engineering → Anticipated Epics + FEATURE inventory

Identify observable user-facing capabilities. A feature is anything the system lets a user (or an API consumer) do. Sources:

• Routes / controllers / CLI commands / public API endpoints
• Rendered pages / navigation entries
• Public exports if the project is a library
• Test descriptions (describe('user can ...'), it('admin should ...'))

Step 3a: Anticipated Epics. Before writing FEATURE files, group the observable capabilities into 1-N thematic clusters (e.g. by domain, module, user group). For each cluster, write an Epic placeholder at _devprocess/requirements/epics/EPIC-{nn}-{slug}.md from EPIC-TEMPLATE.md with:

---
status: Anticipated (not yet validated)
source: /reverse-engineering on {date}
needs-validation: true
---

# EPIC-{nn}: {thematic name, e.g. "User and access management"}

> **Status**: Anticipated. Derived from observed capabilities,
> not from a validated business motivation. `/business-analysis`
> refines or replaces the Hypothesis Statement and outcomes.

## Anticipated Scope

{1-2 sentences: which observed capabilities this epic groups, and why}

## Evidence

- {module or directory, short description}
- {route or API surface}
- {test file that describes this capability cluster}

When no obvious clusters exist, create a single catch-all EPIC-01-observed-capabilities.md. Split later.

Step 3b: FEATURE files. For each observable capability, write _devprocess/requirements/features/FEAT-{ee}-{ff}-{slug}.md using the existing FEATURE-TEMPLATE.md but with reduced scope. {EPIC} is the 2-digit number of the anticipated Epic the feature belongs to, {NNN} is the local counter inside that Epic.

---
status: Observed (not validated)
source: /reverse-engineering on {date}
---

# FEAT-{ee}-{ff}: {short name}

## Feature Description

{What the code does, in 2-3 sentences.}

Source: {file paths and line ranges that implement this feature}

## Benefits Hypothesis

[NEEDS USER INPUT. /requirements-engineering will define this
after /business-analysis has validated the WHY.]

## User Stories

[NEEDS USER INPUT]

## Success Criteria

[NEEDS USER INPUT]

## Technical NFRs

{Any non-functional constraints visible in code: rate limits, timeout
settings, retry policies, auth requirements.}

Source: {config or middleware locations}

Keep FEATURE names short and capability-focused ("User login", "Project export", "Admin user management"). Do not lump multiple capabilities into one feature.

Step 3c: Observable Success Criteria. Write one SC per observable capability with three columns:

• Capability line derived from routes/handlers/tests.
• Target is [AWAITING BA] unless the code itself declares a deterministic target (timeout constants, rate limits, perf assertions); then the observed target goes in with Source:.
• Measurement follows the same rule.

Example table:

| ID | Kriterium (observable) | Target | Messung |
| ----- | ----------------------- | ------------------ | -------------------------- |
| SC-01 | Nutzer kann Unterhaltung erneut oeffnen | [AWAITING BA] | Pilot-Interview |
| SC-02 | Startup-Abbruch wenn Sandbox nach 30s nicht bereit | 30s (Source: src/main/index.ts:1088) | Integration-Test |

This satisfies invariant N-4 (every feature has at least one SC). /business-analysis later fills [AWAITING BA] with validated business targets.

Phase 4: Business reverse engineering → BA draft

This is the most constrained phase. Read:

• README.md for intro, use cases, motivation
• docs/ or documentation/ content
• package.json / pyproject.toml description, keywords, author
• CHANGELOG.md for historical goals and removed features
• Landing-page copy if the repo contains one
• Issue/PR templates if they describe target users
• Contributing guides
• Marketing text in any comments or top-of-file docstrings

Build _devprocess/analysis/BA-{PROJECT}.md from the BA-TEMPLATE.md but with every section following the evidence rule:

---
status: Draft (reverse-engineered, awaiting validation in /business-analysis)
created-by: /reverse-engineering
needs-validation: true
---

For each section of the BA template:

• Project purpose / scope: fill from README intro if present, otherwise placeholder.
• Primary persona: fill ONLY if the docs explicitly name a user type. Quote the exact phrase. If no user type is named, placeholder.
• Secondary personas: same rule.
• Problem statement: from README motivation / "Why this exists" sections. Otherwise placeholder.
• How-Might-We question: only if the docs contain an explicit problem statement you can frame as HMW. Otherwise placeholder.
• Value proposition: from README or marketing copy. Otherwise placeholder.
• Jobs to be Done: only if the docs mention concrete user jobs.
• Idea Potential, Pricing, Competitors: placeholders unless explicitly documented.
• Critical hypotheses: placeholder unless the docs mention assumptions the team was testing.

Every non-placeholder sentence carries a Source: line.

When you finish, count:

• filled-from-sources: how many sections are evidence-backed
• needs-user-input: how many sections are placeholders

Include both counts in the BA header so /business-analysis knows how much work remains.

Phase 5: Backlog extraction → BACKLOG.md

Scan for:

• TODO, FIXME, HACK, XXX comments in code
• Failing or skipped tests (.skip, xit, pytest.mark.skip)
• Undocumented environment variables (referenced in code but missing from .env.example or README)
• Missing test coverage on observable features (Phase 3 features without matching test files)
• Outdated dependencies (if a lockfile and package.json disagree, or if major versions are pinned to old releases)
• Missing CI steps (e.g. no security scan, no type-check, no linter)

Append each finding as a row to _devprocess/context/BACKLOG.md following the binding format in skills/requirements-engineering/templates/BACKLOG-TEMPLATE.md. Reverse-engineered findings go into the Standalone Items section (no Epic yet, to be reassigned during BA/RE) with:

• Status = Backlog
• Prio = P2 (default, the team reprioritises during BA/RE)
• Source = REV
• Evidence = path:line or short description
• Typ = Chore (or Security for audit findings, Bug-Followup for failing or skipped tests)
• Notes carries needs verification: code-vs-doc for every REV finding. Phase 7 clears this marker (it sets the finding to Done if the target turns out to be already satisfied, or removes the marker once it has confirmed the gap is real).

Title column = bare title only. The ID lives in column 1; flow.py builds the GitHub issue title as <id>: <title>, so a prefix in the Title cell duplicates the ID.

Verify before filing. Read the code AND the doc the finding points at; drop the finding if the target is already satisfied (timeout table already in arc42 §6, CI scan step already exists, env var already in .env.example / README). Survivors still get needs verification: code-vs-doc so Phase 7 re-checks them.

If this skill seeds the backlog file, copy the template headers (Dashboard, Legende, Standalone Items, Traceability) first and update dashboard counts after all rows are written.

Phase-Schema for the backlog. Phase is orthogonal to Status:

• Released - fully implemented; all SCs traceable in code. Partial implementation belongs in Building, not Released.
• Building - in progress or ready to start; scope clear.
• Planned - anticipated, needs refinement (each Candidates item carries needs refinement: {reason} in Notes).

Reverse-engineered items default to Phase = Building (code exists, awaiting validation). Phase 7 promotes to Released or demotes to Planned based on code evidence.

Phase 6: Handoff Ritual (moved, see below)

Phase 7: Codebase-Verification Gate (added 2026-04-20)

Before the Handoff Ritual runs, every FEATURE-spec and every ADR from Phases 2-3 gets an explicit verification against the codebase. This is the gate that lifts claims from "we wrote it down" to "we checked it compiles with reality."

Mechanism. For each FEATURE-spec and each ADR, decide the verification footer based on outcome:

• Green Released item, no drift: append a single line Codebase-Verifikation {date}: Released, no drift.
• Drift found OR Phase != Released: append the full block:

## Codebase-Verifikation ({date})

**Phase:** {Released | Building | Planned | Candidates}

**Refinement-Bedarf:** {none | reason if Candidates or Planned}

**Verifikations-Befund:**
- Source-Pfade geprueft: {n/m existieren}
- Success-Criteria stichprobe (Features) oder Kern-Decision (ADRs):
 {n/m belegt}
- Drift-Findings: {"Doc: X / Code: Y / Einschaetzung: ..."}

**Backlog-Vorschlag:** {none | concrete FIX/IMP text}

Parallelisation. For large projects (20+ FEATUREs, 30+ ADRs), split verification into 3-6 concurrent agents with non-overlapping file slices. Each agent verifies its slice and writes the verification section directly. Consolidate Phase counts into the Backlog Dashboard at the end.

Backlog drift items. Every drift finding that cannot be fixed with a one-line doc edit becomes a new Backlog entry. Common drift: outdated paths/line numbers, SCs marked AWAITING RE, UI disabled in code but active in doc, ADR describes X / code implements Y, BA says "separate" / code shows full implementation.

Verify the Phase-5 findings too. For each Standalone row with Source = REV (carrying needs verification: code-vs-doc):

• Target already satisfied -> Status = Done, Phase = Released, remove the marker, add verified {date}: already present in <ref>.
• Gap confirmed -> remove only the marker; leave Status = Backlog.
• Cannot decide -> keep marker, append needs refinement: {reason}, escalate via User Interaction Protocol.

Do not let a finding reach GitHub while it still carries needs verification: code-vs-doc; the marker signals Phase 7 has not run.

Phase 8: Graph-Konsistenz-Check

Phase 7 asks "matches this feature the code?". Phase 8 asks "is the artefact graph as a whole consistent?". Run /consistency-check mode A (syntactic, cheap). Output:

• Graph-Health section in BACKLOG with invariant status.
• Auto-filed FIX/IMPs for each gap (Source = CONSISTENCY-CHECK).
• Console summary for the Handoff Ritual.

Run /consistency-check --deep only at MVP scope with a valid BA (checks Feature-ADR coherence and BA-Feature anchors).

Precondition: Phases 0-7 must be done. Running Phase 8 early gives false gaps.

Phase 9: Parallel-branch alignment (advisory)

RE allocates fresh ids; existing unmerged branches may collide. This phase enumerates them and reports renumber needs without modifying other branches.

Steps:

1. List other branches:

   git for-each-ref --format='%(refname:short)' refs/heads/ \
     | grep -Ev '^(main|master|dev|<re-branch>)$'

2. Per branch, check collisions read-only:

   python3 tools/renumber-for-merge.py \
     --target <re-branch> --source-ref "$B" --list-conflicts

3. Aggregate into _devprocess/context/HANDOFFS.md:

   ## reverse-engineering {YYYY-MM-DD} -- parallel-branch alignment
   Branches with id collisions:
   - feature/foo: epic 1, feat 2, fix 0, imp 0
   To align: bash scripts/merge-to-dev.sh <branch> <re-branch>

4. Maintainer decides per branch (renumber / rebase / abandon).

If no parallel branches exist, print "No parallel branches found" and proceed.

Phase 6: Handoff Ritual

Standard 4-part pattern: artifact report, handoff context, phase-end commit, transition question.

Part 1: Artifact report -- counts per artifact type (plan-context, ADRs, arc42 sections filled, FEATURE specs, BA draft with filled/placeholder counts, new backlog entries) plus sources walked (files scanned / docs read).

Part 2: HANDOFFS.md entry -- scope (Simple/PoC/MVP), what was reverse-engineered, evidence coverage, risks/gaps, recommended next phase (always /business-analysis).

Part 3: Phase-end commit -- per skills/project-conventions/references/team-workflow.md ("Phase-end commit (binding)"). Stages every produced artefact, commits, sets the phase tag, opens a draft PR. RE uses the single branch feature/reverse-engineer-<repo-name>. Canonical message:

chore(reverse): <repo-name> reverse-engineering complete

<one-line summary: N FEATUREs, M ADRs, BA draft, K backlog entries>

Refs: <repo-name>

After the commit: python3 tools/github-integration/flow.py tag-phase --item <repo-name> --phase reverse. Skip silently if working tree is clean.

Part 4: Transition question

"Technical context is captured. I also built an evidence-based BA draft, but it is not validated. {N} sections are marked [NEEDS USER INPUT]. Next step: /business-analysis. Start now, or review the reverse-engineered artifacts first?"

On agreement or when running inside /dia-guide: start /business-analysis (Validation Mode auto-detects the draft BA). On rejection: pause; artifacts stay in _devprocess/.

Quality gates

Before the Handoff Ritual, verify:

1. Source per claim block. Grep written files for unattributed claim blocks. BA draft additionally needs per-sentence sources.
2. Status marker on every file. plan-context, arc42, every ADR, every FEATURE, the BA draft.
3. No invented personas. BA persona content must quote/cite a doc source, otherwise [NEEDS USER INPUT].
4. No invented HMW. Same rule.
5. FEATURE count matches observable capabilities. 12 routes -> not 4 features and not 30.
6. Backlog non-empty for any non-pristine codebase (else you missed the TODO/FIXME scan).
7. No format or numbering conflicts. Resolve coexisting ADR formats or numbering series during Phase -1.
8. Codebase-Verifikation present on every FEATURE and ADR per Phase 7 (either the one-liner or the full block).
9. Backlog Phase-counts reflect Phase 7 results. Dashboard has Released / Building / Planned / Candidates counters; drift findings appear as rows.

Fix any failed gate before running the Handoff Ritual.

When to use which phase depth

• Simple Test: Phases 0-2 only, skip BA draft (Phase 4), output is plan-context + 1-3 ADRs. Use when the user is onboarding one small feature into the workflow.
• PoC: Phases 0-4, skip full arc42 (keep the §1-5 skeleton), skip exhaustive backlog scan. Output is the core artifact set.
• MVP / full onboarding: All phases, full rigor.

Match depth to scope. Do not over-produce for a small target; do not under-produce for a full onboarding.

Project structure

Follows /project-conventions. Detect the root before writing:

• docs/adr/ or docs/architecture/ exists -> docs/ root.
• _devprocess/ exists -> _devprocess/ (canonical).
• CLAUDE.md hints either way -> follow the hint.
• Nothing present -> default _devprocess/.

Ensure structure exists before writing:

mkdir -p {ROOT}/{analysis,requirements/{epics,features,handoff},architecture,adr,context,implementation/plans}
touch {ROOT}/context/HANDOFFS.md

adr/ is canonical for ADRs; consolidate architecture/ADR-*.md into adr/ during Phase -1.

Seed {ROOT}/context/BACKLOG.md from skills/requirements-engineering/templates/BACKLOG-TEMPLATE.md with the four Phase counters (Released / Building / Planned / Candidates) in the Dashboard.

Keywords

reverse engineering, existing project, legacy codebase, brownfield, onboard existing, import code, we already have code, existing app, legacy import, codebase snapshot, reverse engineer, extract artifacts, bestehendes Projekt, existierender Code, Legacy-Projekt, Code-Import