CI/local parity: the local gate must truly cover everything CI checks

The core rule: "local green" and "CI green" are two separate claims until you've explicitly verified that the local gate covers everything CI checks. Every time a CI step checks something local can't trivially do (network access, an external service, a slow scan), that's an explicitly named gap — never an implicit assumption.

Not the same thing: two other public tools with similar-sounding names (claude-pre-commit, config-drift-checker) validate Claude Code's own configuration (SKILL.md structure, CLAUDE.md, hooks) via pre-commit/eval regression. This skill is about a different axis entirely: validating that an application's CI pipeline and its local verification stay in sync — not about linting the agent's own config files.

Checklist — for every project with CI

Work through this when setting up a new pipeline, or when auditing an existing one:

• Does one local command exist that runs "everything" (e.g. pnpm verify, make check), not a loose list of commands someone has to remember?
• Does CI call those exact same commands — not its own, separately maintained variant that can drift? (Separate, named CI steps are fine, as long as each step literally calls the same underlying script as local — named steps are for visibility, not separate logic.)
• For every CI step: can it also run locally, without extra setup? If not (a network dependency like SonarQube/an external API/a slow scan), is there an explicit, separately runnable local command that covers it? Is that gap literally documented (in CLAUDE.md/AGENTS.md/README), not silently assumed?
• Does that separate check degrade gracefully when the external dependency is unreachable (no server, no token, tool not installed)? A hard crash on "SonarQube unreachable" is just as bad as silently skipping it — it must give a visible warning and only then decide whether to block.
• Are there git hooks enforcing this, not just documentation someone can forget to read? At minimum pre-commit (the fast, network-free gate) and pre-push (that plus the slower/network- dependent part, see below).
• Is coverage reporting present if CI has a coverage gate? A quality gate that checks coverage without a report ever being generated always sees 0% — no matter how many real tests exist. This is the most common silent cause of an unexpectedly failing gate on a first SonarQube/Codecov integration.
• Is every commit or small group of commits pushed separately, not in large batches? See "Trunk-based is only a gate if you also check it per push" below — this is a procedural condition, not a technical one, and is therefore the easiest to forget.
• Does the deploy/hosting documentation still match what CI actually does? Especially after a migration (e.g. SiteGround → Cloudflare Pages, rsync → wrangler), the README/CLAUDE.md often keeps describing the old situation while the pipeline has long since changed. This is the same "implicit assumption" mistake as the rest of this checklist, just about documentation instead of commands — and is therefore easy to miss in a pure CI audit.
• Does the CI container run the same binaries as the local dev environment? See "Local green ≠ CI-container green" below.
• Is the CI image pinned by digest, not just by tag? A tag like node:22-slim can silently change underneath you even while the binary list looks the same today — pin node:22-slim@sha256:<digest> (or your registry's equivalent) for a build that genuinely doesn't drift, and document the process for bumping it deliberately.
• Does secret scanning (gitleaks or similar) also have a CI backstop, not just a pre-commit hook? A pre-commit hook is bypassable and never scans a commit from outside that checkout — see "Gitleaks in CI" below, and confirm the scan job actually blocks build/deploy via needs:/depends_on.

Git hooks: the pattern

Design decision: native git hooks, no dependency. No Husky/lint-staged — this project (like most of this kind) already requires "no dependencies" as a baseline, and native hooks meet that bar without adding a package to maintain, version, or audit:

.githooks/
  pre-commit   # fast, no network: the local "verify" command
  pre-push     # that again, plus the slower/network-dependent part

pre-commit:

#!/bin/sh
pnpm verify

pre-push (example with a gracefully degrading external check):

#!/bin/sh
set -e
pnpm verify
node scripts/<external-check-name>.mjs

The external check itself (e.g. scripts/<external-check-name>.mjs for SonarQube) follows this shape — credentials/tool present, then service reachable, only then the real check:

#!/bin/sh
set -e

# 1. Credentials/tool present? Not "installed", "usable right now".
if [ -z "$SONAR_TOKEN" ] || ! command -v sonar-scanner >/dev/null 2>&1; then
  echo "WARN: SonarQube credentials/tool missing — skipping (not blocking)."
  exit 0
fi

# 2. Service actually reachable? Short timeout — don't hang CI on a dead host.
if ! curl -sf --max-time 2 "$SONAR_HOST_URL/api/system/status" >/dev/null; then
  echo "WARN: SonarQube unreachable — skipping (not blocking)."
  exit 0
fi

# 3. Only now run the real check, and pass through ITS exit code
#    (exit 1 on a real failure, not on unreachability).
sonar-scanner

Never test -n "$X" && A || B for this kind of conditional logic. If A fails for an unrelated reason (a transient tool error, not "nothing found"), fallback B still triggers and its exit code masks A's real failure. Always use an explicit if [ -n "$X" ]; then A; else B; fi.

Activate with: git config core.hooksPath .githooks, preferably via a pnpm hooks:install script so it doesn't stay a manual, easily-forgotten step.

Gitleaks belongs in pre-commit, not again in pre-push. At push time there's normally nothing staged, so gitleaks protect --staged in pre-push is a sham check that always reports "0 commits scanned." pre-commit already scanned the staged diff before the commit existed, and CI scans the push again, diff-scoped — pre-push therefore only needs to repeat verify, not gitleaks.

Trunk-based is only a gate if you also check it per push

Trunk-based development ("commit small and often, no long-lived branches") only works because CI checks every push. Push several commits in one batch, and CI only checks them once too, against one large, hard-to-trace diff.

In practice: push after every commit, or after a small, coherent group (e.g. one task from an implementation plan). Not: collecting every task from a session and pushing it all at the end. A pre-push hook that runs the external check also makes this naturally less painful to do often — the check is already confirmed locally before the push, not a surprise afterward.

CI pipeline structure: named steps, not one bundle

One big verify block in CI hides which step failed. Separate, named steps — each calling the same underlying script as local — give direct visibility without losing the "one source of truth" guarantee:

GitHub Actions form:

steps:
  - name: Lint
    run: pnpm lint
  - name: Test
    run: pnpm test:coverage
  - name: <external-check>
    run: <external-scanner> ...

Same principle, different syntax, for Woodpecker and GitLab CI: ci-examples.md.

Add a security baseline where relevant (e.g. gitleaks for secret scanning on this push's commits, plus a .env guard as belt-and-suspenders alongside .gitignore) — this isn't specific to "CI/local parity" per se, but is the standard baseline sibling projects already use and that you can adopt immediately on a new pipeline.

Gitleaks: --staged locally, diff-scoped in CI — never a bare full-history scan as the standard check. A gitleaks git -v . with no scope restriction permanently blocks a repo the moment even one innocuous pattern has ever appeared in the history (an env-var name in documentation like curl -u "$SONAR_TOKEN:", a public analytics beacon token, documented default credentials). Locally (pre-commit, before the commit exists): gitleaks protect --staged -v .. In CI (after the push): diff-scoped to this push's range — see "Gitleaks in CI" below for the concrete implementation, including the explicit fallback for a freshly registered CI system or a first push. Before enabling gitleaks on an existing project for the first time: run one full-history scan once to see what's already in there, have a human review real findings, and suppress confirmed-innocuous hits in a baseline file (gitleaks git --report-format json --report-path .gitleaks-baseline.json, then pass --baseline-path to every subsequent scan) — never weaken the daily check itself.

Gitleaks in CI: two options, choose based on repo visibility

Public repo → gitleaks/gitleaks-action@v2, no hand-built diff-range logic. Reads the push/PR event context and automatically scans the right commit range — needs fetch-depth: 0, free for public repos, requires a GITLEAKS_LICENSE for private ones.

Private repo without GITLEAKS_LICENSE → the CLI itself with --log-opts. Vendor-neutral, same diff-scoping, plus the zero-SHA first-push fallback and SHAs passed via env: (never interpolated directly into run: with ${{ }}).

Full YAML for both options, and why each key point matters: ci-examples.md.

Local green ≠ CI-container green: image parity is parity too

"Local green" only covers what actually runs locally. A minimal CI image (e.g. node:22-slim) often lacks tools that are trivially present locally (git, curl, ...) — a test fixture that calls such a binary (e.g. via execFileSync) then passes locally and in the pre-push hook, but silently fails in the real CI container, with no local check ever able to catch that difference. Image parity is just as much "CI/local parity" as coverage reporting or secret scanning.

How to catch this going forward:

1. After every push to a gate-guarded branch: query the real CI pipeline status (e.g. woodpecker-cli pipeline last <repo> or the CI system's own CLI/API) — never report "pushed" as "done" based only on the local pre-push hook's output.
2. When a new test file calls an external binary (git, curl, a CLI tool): explicitly check whether the CI image contains that binary, don't assume "it's there locally" is enough. When in doubt, reproduce locally in the exact same image — exact command and the --user gotcha: ci-examples.md.
3. The fix belongs in the CI step itself (install the missing package, e.g. apt-get install -y git before the test step), not in the test code — the test code is right to use the binary directly, it's the image that's missing it.

What this doesn't replace

This skill is about the verification chain (local ↔ CI), not about how you get code written or which model you pick for that — see a model-delegation/orchestration skill for tier-based model choice and the diff-verification discipline that goes with it. The two complement each other: this one ensures whatever finally gets committed also has to pass through the same gate as CI; that other one ensures what a model writes isn't blindly trusted before it gets that far.