agent-toolkit-for-aws

Set up the AWS DevOps Agent and AWS Security Agent connections. Use when the user says "set up", "configure", "connect", or when MCP tools are missing.

Setup and diagnostics for the AWS DevOps Agent MCP connection. Triggers when aws-devops-agent is missing from .mcp.json, when the connection is broken, or when the user says "set up devops agent" / "configure agent". Does NOT trigger if the MCP is already connected and working.

Configure AWS Security Agent for the current workspace — provision or reuse an agent space, IAM service role, and S3 bucket. Use when the user asks to "set up security agent", "configure security scanner", "is security agent configured", or on first-time use before any scan or pentest.

Configures AWS Shield Advanced for enhanced Distributed Denial of Service (DDoS) protection: subscribing accounts and adding resource protections, enabling automatic application layer (layer 7) mitigation through AWS WAF, configuring health-based detection with Route 53 health checks, setting up Shield Response Team (SRT) access and proactive engagement, reviewing DDoS events and requesting cost protection credits, and aggregating resources into protection groups. Applicable when the user wants stronger DDoS protection for internet-facing resources (CloudFront, Application or Network Load Balancers, Elastic IP addresses, Global Accelerator, or Route 53 hosted zones), wants expert help during an attack, or wants to recover attack-driven scaling charges. Routes to the right per-task procedure in references. Not applicable for authoring AWS WAF rules (waf skill), creating Route 53 health checks (route53 skill), or org-wide Shield Advanced rollout with Firewall Manager (firewallmanager skill).

Gets AWS credentials for CLI/SDK access via `aws login`. Activates when a developer needs to authenticate to AWS for local development, when an AWS operation fails due to missing or expired credentials, or when someone asks about setting up AWS access. Triggers: "set up AWS", "configure AWS", "aws login", "get credentials", "authenticate", "session expired", "token expired", "no credentials", "AccessDeniedException" with no configured credentials.

Configures AWS Site-to-Site VPN: creating an IPsec VPN connection between an on-premises network and a VPC, choosing the target gateway (virtual private gateway, transit gateway, or AWS Cloud WAN), choosing static or dynamic (BGP) routing, sizing tunnel bandwidth (Standard 1.25 Gbps or Large 5 Gbps), connecting many sites through a VPN Concentrator, applying the customer gateway device configuration, making a connection highly available, and monitoring tunnels with CloudWatch. Applicable when the user wants to connect a data center or branch office to AWS over an encrypted tunnel, choose how routes are exchanged, scale throughput, consolidate sites, or diagnose a down tunnel. Routes to the right per-task procedure in references. Not for AWS Direct Connect (its own service), Client VPN for individual remote users, the transit gateway side of a VPN attachment (transitgateway skill), or Route 53 DNS work.

Interactive discovery + implementation workflow that gathers requirements through picker-based questions (intent, scope, constraints, preferences), scans the codebase for what it can already infer, then writes an AWS architectural scaffold and implementation directly into the project. Use when the user wants to build a new app, scaffold a project, or expand/refactor an existing one on AWS — anything that calls for a structured discovery flow followed by code changes, not a one-off lookup. Do not use for: factual lookups about AWS Activate / programs / credits, requests for a single copy-paste prompt, non-AWS architectural work, architecture advice/recommendations without code changes (see architect-for-startups), a new idea centered on an AI agent — runtime selection, agentic architecture, or an agent POC (see agent-advisor), or migrating an existing GCP/Azure/Heroku workload or an LLM SDK rewrite (see gcp-to-aws / azure-to-aws / heroku-to-aws / llm-to-bedrock).

Store and query vector embeddings using Amazon S3 Vectors, a cost-effective long-term vector storage service with its own API namespace (s3vectors). Triggers on: create S3 vector bucket, vector index, store embeddings, semantic search, RAG vector storage, similarity search, vector database, migrate from other vector databases. Do NOT use for: querying tabular data (use querying-data-lake), S3 object storage, or hundreds/thousands of sustained QPS (use OpenSearch).

Tests Amazon MWAA workflow execution end-to-end: trigger a run and monitor it to completion for Provisioned (Python DAG, via Airflow REST API) and Serverless (YAML workflow, via StartWorkflowRun). Verifies the artifact is deployed and parse-ready, triggers with confirmation, polls to terminal state, and on failure delegates diagnosis to debugging-mwaa-workflow and artifact/redeploy fixes to authoring-mwaa-workflow, then retests up to a capped number of attempts. Triggers on: test my DAG, test my workflow, run my DAG, trigger a test run, does my DAG work, smoke-test the pipeline, verify my workflow runs, execute my DAG to check it. Not applicable to writing or deploying a new workflow (handled by authoring-mwaa-workflow), or for diagnosing why a run failed or root-causing an error (handled by debugging-mwaa-workflow).

Best-practice authoring guidance AND a read-only policy gate for AWS Terraform generated by a migration skill. Load during any phase that writes a terraform/ directory — first as the "what to emit" posture rules + security-baseline spec, then after writing as the deterministic policy verdict. Read-only: it reports whether the generated Terraform passes; it never edits .tf files, never touches .phase-status.json, and never decides phase completion. Complements (does not replace) terraform fmt/init/validate.

Run an AWS Security Agent threat model review on spec/design documents. Use when the user asks to review a spec for security, run a threat model, check if a design introduces security risks, review requirements.md or design.md for security posture changes, or STRIDE analysis.

Retrieves authoritative guidance on Amazon Timestream for InfluxDB across its supported engine variants. Applicable to any InfluxDB-on-AWS request including engine variant and licensing selection, provisioning and IAM, encryption at rest (AWS-owned and customer-managed KMS keys, key policies, and key lifecycle), schema design (tags vs fields, cardinality, HTTP/sensor/metric data modeling), migration from LiveAnalytics, Processing Engine plugins, connectivity (database endpoints and private or public access), and write/query errors.

Configures AWS Transit Gateway: creating a hub and attaching VPCs, segmenting traffic with route tables, centralizing egress and inspection through a hub (appliances or a Gateway Load Balancer endpoint), forcing east-west traffic between VPCs through AWS Network Firewall, connecting on-premises networks over the transit-gateway side of a Site-to-Site VPN or Direct Connect attachment (including ECMP to aggregate bandwidth across multiple VPN tunnels), peering transit gateways across Regions, migrating from a VPC peering mesh, and routing IP multicast. Applicable when connecting many VPCs through one router, isolating environments, forcing VPC-to-VPC traffic through a central Network Firewall, reaching on-premises over the hub, linking Regions, or moving off a peering mesh. Not applicable for single-VPC routing, VPC peering between two VPCs (vpcpeering skill), Direct Connect gateway or virtual interface setup (directconnect skill), or Route 53 DNS work.

Troubleshoots failing applications by discovering and analyzing CloudWatch log groups to identify error patterns, root causes, and actionable solutions. Use when an application is experiencing failures and log-based diagnosis is needed.

Diagnoses and resolves Amazon EFS issues including mount failures, NFS timeouts, permission errors, throughput problems, and burst credit exhaustion. Use when the user has an EFS file system that is not mounting, returning errors, performing slowly, or showing access denied.

Diagnoses and resolves Amazon S3 Files issues including mount failures, permission errors, synchronization problems, and performance issues. Use when the user has an S3 file system that is not mounting, returning access denied, not syncing changes to S3, showing files in lost+found, or performing slower than expected.

Upgrades an MWAA environment to a newer Airflow version — within 2.x, within 3.x, or across the 2.x-to-3.x boundary. Computes the version-jump path, inserting the 2.11.x stepping-stone and Python-transition step when needed. Chooses an approach by whether run history and the same environment (URL/ARN) must be kept: a new-environment upgrade (blue-green), a rehearsed in-place upgrade validated on a test copy, or a direct in-place upgrade. Runs Ruff scanning and deprecation-warning log scans for 3.x moves, plus Docker validation, batched deployment, and switchover. Saves a resumable upgrade plan for multi-session work. Triggers on: upgrade MWAA, upgrade Airflow, migrate to Airflow 3, MWAA Airflow 3, Airflow 2 to 3, preserve Airflow history, keep same MWAA environment, blue-green cutover, validation environment before cutover. Not for authoring new DAGs (authoring-mwaa-workflow), debugging unrelated DAG failures (debugging-mwaa-workflow), or MWAA Serverless YAML workflows (provisioned Python DAGs only).

Configures AWS WAF to filter web traffic: creating web access control lists (web ACLs) on CloudFront, Application Load Balancers, API Gateway, and AppSync; AWS Managed Rules tuned in Count mode; rate-based rules for HTTP floods; IP set and geographic match rules; Bot Control (Common and Targeted); turning bot labels into a confidence signal; stripping spoofed inbound x-amzn-waf-* headers; recovering the real client IP behind a CDN; Fraud Control (account takeover and account creation fraud prevention); and logging and request sampling. Use when the user wants to protect a web application or API from common exploits, bots, credential stuffing, fake-account creation, or HTTP floods at the application layer (layer 7). Routes to the right per-task procedure in references. Do NOT use for L3/L4 DDoS protection (shieldadvanced skill), multi-account WAF rollout (firewallmanager skill), CloudFront configuration (cloudfront skill), or Route 53 health checks or records (route53 skill).